Barcoding & Warehousing v25

Sicon Barcoding & Warehousing is integrated in real time with the Sage 200 stock and order processing modules, plus it fully supports all of the Sicon additions including Job costing for issues and returns, works orders for picking and building assemblies, and distribution manager for pre-allocation of stock at goods in.

Release notes:

Make it easier to find your content with:

All Versions Handheld Versions Desktop Versions

Expand content Collapse Content New Features Issues Resolved Dev Notes Change in Functionality Important Only

Know the release number? Use quick search:

250.92.6.0

Issues Resolved New Features Dev Notes
New Features
  • [#17045] Added ability to over book works orders if setting in manufacturing to allow changing of finished item quantity is on. Also allow under booking and so we ask the user if this is the final quantity to book. We also display the quantity remaining to book.
  • [#17074] Allow disabling the stock item UOM override for sales order processing.
  • [#17161] Add Supplier Stock Item Barcode quantities applied at the point of scan and prompt user to confirm barcode quantity when creating a new stock item barcode from Stock Enquiry or at picking.
  • [#17296] Despatch Sales Orders will now display a confirmation message if a tote is selected for packing.
  • [#17457] Add filter to works order selection page.
  • [#17562] When configured show the stock item override unit of measure on Despatch Stock Transfers, Multi Item Transfer, Single Item Transfer, Warehouse Transfer, Issue/Return Stock, Project Issue/Return, Add Stock and Write Off Stock and Receive Stock Transfers pages.
  • [#17847] Despatch/Receive Stock Transfers, Multi Item Transfer, Single Item Transfer and Warehouse Transfer now also lists batch/serial quantities based on any stock item configured unit of measure override.
Issues Resolved
  • [#14749] Fix Add Stock quantity set to ‘1’ despite the selected batch/serial item quantity set to a value less that one.
  • [#16585] Fix Despatch Sales Orders scan batch/serial barcode setting the traceable quantity to required quantity if setting ‘Automatically set the pick quantity to the required quantity when an item is selected’ is enabled. When the batch/serial barcode is scanned the quantity will now be incremented by one.
  • [#16711] Fix free text selected quantity figure shown in a smaller font on the ‘Picked’ tab.
  • [#17089] Fixed issue with Items to Pick page (when picking item on a wave that covers multiple sales orders, and grouping is not on, then the items are split into each sales order when picking on the Items to Pick page). The list was displaying all items to pick for the wave after the first line is picked, instead of just the filtered item that we are currently picking.
  • [#17321] Fix Despatch Sales Orders pick/pack not applying the stock item settings ‘Allow picking/packing without scanning enforcement’.
  • [#17520] Fix Despatch Sales Orders ‘SOPOrderReturn with DbKey = 0 was not found …’ error if Sales Orders ‘Enter number of boxes at despatch’ & ‘Disable prompt for package dimension
  • [#17731] Fix Wave Pick returning to the empty ‘Pick’ page after the final pick for an ungrouped item.
  • [#17735] Fix Works Orders Wave Pick app. crash when attempting to issue/complete the wave
  • [#17785] Fix Despatch Sales Orders pick/pack scan enforcement being required for every item when configured. Previously scan enforcement was only required for the first item picked/packed.
  • [#17922] Fix Multi-Item Transfer batch quantity not applying stock item UOM override when configured to assign batch/serials at allocation.
  • [#18180] Fix Works Order lines pick/issue quantity entries not applying stock item unit of measure override if configured.
  • [#18203] Fix Supplier Stock Item Barcode quantities not applied if multiple stock items are being picked from the same bin.
Dev Notes
  • [#15020] Change user favourite menu items to orange.

Software dependancies: Sicon Barcoding and Warehousing 250.0.5

Date applied: March 5, 2026

250.0.5

Issues Resolved New Features Dev Notes
New Features
  • [#17045] Added ability to over book works orders if setting in manufacturing to allow changing of finished item quantity is on. Also allow under booking and so we ask the user if this is the final quantity to book.
  • [#17074] Allow disabling the stock item UOM override for sales order processing.
  • [#17161] Add Supplier Stock Item Barcode quantities.
  • [#17457] Add filter to works order selection page.
  • [#17581] Add bin dimension fields to warehouse locations. Added width, height, length and calculated volume fields to SiconWABLocation records.
  • [#17583] Add new user setting ‘Allow add new bins to stock items’ to enable bin creation for only configured users, setting is defaulted ‘on’.
  • [#17847] Despatch/Receive Stock Transfers, Multi Item Transfer, Single Item Transfer and Warehouse Transfer now also lists batch/serial quantities based on any stock item configured unit of measure override.
Issues Resolved
  • [#11322] Fix Dynamic Stocktake ‘Object reference not set …’ on loading items list if stock items exist with no related SiconWABStockItem record.
  • [#16442] Remove second reference ‘Kit Build’ filter from SQL view ‘SiconWABKitStockTransView’ to link kit finished item stock transactions for traceable kit label printing.
  • [#16474] Fix Despatch Sales Orders assigning serials during pick resulting in reserved quantities.
  • [#16711] Fix ‘Object reference is not set …’ error when despatching a non-stock item sales order line.
  • [#16844] Fix Amend Despatch screen not prompting user to confirm packages/pallets to be un-despatched and exclude any previously un-despatched packages.
  • [#16844] Fix Amend Despatch Sales Orders not moving pallets/boxes linked to an amended item/line.
  • [#16846] Fix sales order open/lock message ‘xxxxxxxxxx is open by xxxxxx’ if a sales order is being picked/despatched by another user/device, but Barcoding is configured to allow multiple users to open the same order.
  • [#16868] Fix Transfer Stock screen moving all source bin packages to the target warehouse/bin, despite only some being selected on the ‘Record Stock Transfer – Packages’ screen.
  • [#17002] Fix Despatch Sales Orders put back not updating packages, so they still appear on the Sales Order ‘Packaging’ tab.
  • [#17208] Limit user names to 20 characters to fix ‘Cannot set the value of the Field (.UserName) …’ error when writing device users to stock transaction history records.
  • [#17229] Fix Dynamic Stocktake blank/empty Bin Name column results page.
  • [#17312] Prevent pick bins from being pre-selected in bin lookup.
  • [#17313] Selected courier was not pulling onto sales order when using the Despatch by stock item option in the app.
  • [#17316] Fix Stocktake Recount Bin batch/serial numbers and quantities not shown for the correct stock item on the device.
  • [#17325] Fix Stocktake Recount Bin not reducing the quantity of currently in stock batches/serials, e.g. when a new batch number/quantity is added.
  • [#17406] Fix Import Stock Item Settings ‘Device UOM Override’ not setting the stored Barcoding stock item override multiple of stock unit field.
  • [#17409] Fix Dynamic Stocktake ‘Object reference not set to an instance’ on loading items list.
  • [#17426] Lock sales order to user while loading so other users can’t load the order on another device at the same time, when system is configured to not allow picking by multiple users.
  • [#17451] Fix Despatch Sales Orders ‘Cannot update Field (ItemDbKey) with a Null value…’ error when picking/packing a free-test item into a box/package.
  • [#17501] Fix Stocktake ‘The incoming request has too many parameters …’ error when stock item images are stored on the system.
  • [#17563] Fix Receive Purchase Orders displaying incorrect expected quantity if the new stock item configured UOM override is disabled for POP.
  • [#17718] Fix Move To on sales orders error ‘This item is already fully picked, and therefore cannot be picked. Please refresh list of items to pick.’
  • [#17735] Fix Works Order Wave Pick error ‘Works Order Line with ID xxxxxxx not found’ when picking an item.
  • [#17922] Fix Multi-Item Transfer batch selection screen ‘In Stock’ quantity populated with the current allocated quantity.
  • [#18072] Fix Works Orders ‘Object reference not set …’ error when opening a works order on the device.
  • [#18201] Fix Works Order issue not displaying batch/serial list quantities in stock item UOM override when configured/enabled.
Dev Notes
  • [#17164]: We now use the new works order booking in method for booking in works orders.
  • [#17374] Added cross-cut messaging service to set the sales order ‘ready to pick’ flag when a sales order is created/amended.
  • [#17562] Populate stock item override unit of measure enabled/disabled flags, which are used to show override UOM on the device when configured.
  • [#17582] Added new ‘Balance’ field to SiconWABStockHistory to store running balance value after each stock transaction.

Software dependancies: App. 250.92.6.0

Date applied: March 5, 2026

250.0.4.4

Issues Resolved Pre-release

Pre-Release Version: features are only available to customers using a pre-release version who have signed up to the Early Adopter Programme.

Issues Resolved
  • [#17002] Fix Despatch Sales Orders ‘Object reference is not set …’ error when unpacking batch/serial items packed into packages.
  • [#17002] Fix Despatch Sales Orders put back not updating packages so they still appear on the Sales Order ‘Packaging’ tab.

Date applied: January 22, 2026

250.0.4.3

Issues Resolved Pre-release

Pre-Release Version: features are only available to customers using a pre-release version who have signed up to the Early Adopter Programme.

Issues Resolved
  • [#17563] Fix Receive Purchase Orders displaying incorrect expected quantity if the new stock item configured UOM override is disabled for POP.

Date applied: December 22, 2025

250.0.4.2

Issues Resolved Pre-release

Pre-Release Version: features are only available to customers using a pre-release version who have signed up to the Early Adopter Programme.

Issues Resolved
  • [#17409] Fix Dynamic Stocktake ‘Object reference not set to an instance’ on loading items list.
  • [#17501] Fix Stocktake ‘The incoming request has too many parameters …’ error when stock item images are stored on the system.

Date applied: December 18, 2025

250.0.4.1

Issues Resolved Pre-release

Pre-Release Version: features are only available to customers using a pre-release version who have signed up to the Early Adopter Programme.

Issues Resolved
  • [#16844] Fix Amend Despatch screen not prompting user to confirm packages/pallets to be un-despatched and exclude any previously un-despatched packages.
  • [#16868] Fix Transfer Stock screen moving all source bin packages to the target warehouse/bin, despite only some being selected on the ‘Record Stock Transfer – Packages’ screen.

Date applied: December 11, 2025

250.92.5.0

Issues Resolved New Features Dev Notes
New Features
  • [#16743] Applied stock item unit of measure overrides when configured.
  • [#15020] Add user favourite functionality.
  • [#16745] Add new Sicon Manufacturing (WOP) setting to allow stock item to be scanned when first picking, auto-select first expected bin and automatically set the pick quantity to the required quantity when an item is selected.
  • [#14692] Show the remaining quantity to build on the Build Kit, Add Stock page.
  • [#16692] Added options to create replenishment by Use by date or Sell by date.
  • [#16743] Works Order pick now displays unit of measure name.
  • [#16431] Made sure that when we issue stock (include via projects), that the unit of measure override is taken into account, and therefore the correct stock unit quantity is issued.
  • )[#16432] Made sure the UOM override set on the stock item works on dynamic stocktake and Sage stocktake screens. Also made sure the quantities visible on the enter traceable items screen show with the UOM override.
  • [#16431] Made sure that when we issue stock (include via projects), that the unit of measure override is taken into account, and therefore the correct stock unit quantity is issued.
  • [#16485] Added ability to selecting the number of package types when despatching a sales order.
Issues Resolved
  • [#17114] Fix Build Kits not listing picked components.
  • [#16745] Fix Works Orders new setting to automatically set the pick quantity to the required quantity not working for traceable items when batch/serials are selected at despatch.
  • [#16745] Fix Works Orders non-traceable item barcode scan ‘Value cannot be null. (Parameter ‘source’)’ error.
  • [#16743] Fix Works Orders put-back picked items not not applying new stock item UOM override to available batch/serial quantities.
  • [#16277] Works Order pick/pack was not applying the stock item settings ‘Allow picking/packing without scanning enforcement’.
  • [#16431] When issuing stock allocated quantity is now hidden for traceable items when selecting batch/serials at despatch, as this figure will always be zero.
  • [#16601] Write Off Stock will now also remove written-off pallets when pallet/package numbers are scanned to select written-off stock.
  • [#16690] Fixed error when picking a non traceable works order line (cannot set value as null).
  • [#16270] Fix trailing space added to the search/filter text when a barcode is scanned on some devices.
  • [#16277] Fix ‘Value cannot be null.’ error when picking a non-traceable works order component by scanning a barcode.
  • [#16743] Sorted issue with quantity of batch/serial items not showing correctly in UOM override when picking works order lines.
Dev Notes
  • Updated Microsoft Maui and SQL Lite packages to support 16 KB requirement on Google Play Store.

Software dependancies: Sicon Barcoding and Warehousing 250.0.4

Date applied: December 11, 2025

250.0.4

Issues Resolved New Features Dev Notes
New Features
  • [#16743] Stock item maintenance unit of measure override configuration options added.
  • [#15020] Applied server-side changes to store user favourites.
  • [#15562] Show the user’s last logged-in app. version in the Settings screen user list/grid.
  • [#16608] Added Wave filter to include despatch but not invoiced sales orders.
  • [#16692] Added options to create replenishment by use by date or sell by date.
  • [#11368] Removed the restriction to not allow replenishment when selecting batches/serials at allocation.
  • [#16939] New Dynamic Stocktake configuration setting ‘Add stock internal area’ added to override nominal postings when adding extra/found stock.
  • [#16743] Works Order pick now displays unit of measure name.
  • [#16745] Add new Sicon Manufacturing (WOP) setting to allow stock item to be scanned when first picking, auto-select first expected bin and automatically set the pick quantity to the required quantity when an item is selected.
  • [#16657] Create new bin from device now automatically sets bin name upper/lower case characters to match the Maintain Locations list entry.
Issues Resolved
  • [#16432] Fixed issue with invalid cast error on binItem (persistentBinItem) when adding found stock to a dynamic stocktake.
  • [#16743] Fix Works Order book-in finished goods ‘The quantity selected is greater than the quantity expected on the works order’ if stock item UOM override is set but not enabled.
  • [#16743] Fix Works Order component allocation default quantity incorrect on hand held device if stock item UOM override is set but not enabled for WOP.
  • [#16728] When writing off stock during a dynamic stocktake, and that stock was allocated to a sales order line, we now attempt to reallocate the sales order line. This is only if we select batch/serials at despatch.
  • [#16662] Fix package not recorded when picking a miscellaneous stock item into a box and also show any picked/packed package numbers on the device ‘Desp’ tab.
  • [#16692] Fixed issue with picking a Replenishment for traceable items selecting at allocation, and was complaining about not moving all allocated quantity.
  • [#16743] Fix Works Orders batch/serial selection quantities not not applying new stock item UOM override, including during Un-Issue and Put-Back functions.
  • [#16662] Fix pack all picked items ‘object reference is not set …’ error when packing a miscellaneous stock item into a box.
  • [#16958] Pass newly added criteria when running WO Book In label.
  • [#17114] Fix Build Kits not listing picked components.
  • [#16743] Fix Works Orders batch/serial selection quantities not not applying new stock item UOM override, including during Un-Issue and Put-Back functions.
  • [#16964] Confirmed active locks on sales orders during despatch is applied if the setting to lock sales orders is enabled. A message was appearing saying that the sales order is locked during the despatch. Also added a setting for the active locks during despatch.
  • #16277] Stock item maintenance ‘Allow picking without scanning enforcement’ text clarified.
Dev Notes
  • [#16964] Added logging when active locks for sales orders during despatch is enabled.
  • [#16956] Extend the Import Stock Item Settings to accommodate the new UOM Override settings for SOP, POP, Works Orders, Add Stock, Issue Stock, Transfer Stock and Stocktake.

Software dependancies: App. 250.92.5.0

Date applied: December 11, 2025

250.92.4.0

Issues Resolved New Features Important
Important Info
  • Web Platform upgrade may be required for Microsoft Owin v4.2.3.0 compatability.
New Features
  • [#16153] Added ability to add found items on a Sage stocktake.
  • [#16278] Added new feature to allow user to select a stock item to despatch. This will option the sales order to allow the user to despatch the sales order.
  • [#16246] Add maintainable package types to Despatch Sales Orders package selection page.
  • [#16245] Despatch sales orders now allows user to maintain box/package dimensions after adding packages, not only at the point of despatch.
Issues Resolved
  • [#15725] Improved performance on the To Despatch tab on the Sales Order. Also enabled scrolling on the To Despatch tab.
  • [#15537] Fix Despatch Sales Orders app. crash when taking multiple photo from the ‘Pick’ tab.
  • [#15837] Fix Despatch Sales Orders ‘Desp’ list showing all items as ‘Sicon.WM.Models.Stock.PickListItem’.
  • [#15914] Fixed double picking on sales orders again. This would happen if the To Pack tab was refreshed by pulling down, and then the user would move to the To Pick tab quickly and pick something. The item would remain in the To Pick tab after picking. Also, the user was able to pull down and refresh the items to pick after selecting an item to pick, but before the Pick page appeared. This would refresh the list, and then after the pick, the item just picked would not be removed from the list.
  • [#15866] Fixed issue where some items on replenishment were disappearing after scrolling.
  • [#15887] Suppress ‘Is bin ‘Picked:SOP’ now empty?’ message when packing an item with setting ‘Prompt the user to confirm if a bin is empty after picking’ enabled.
  • [#16096] Fix Wave Pick add/remove tote ‘Object reference not set …’ error if Wave ID is zero.
  • [#16024] Tapping on a sales order in the list of sales orders to despatch after despatching a wave was displaying an object reference error. It now displays the sales order info.
  • [#16061] Fix Despatch Sales Orders pick/pack tab lists and line counts not refreshing after picking a miscellaneous (or service/labour) stock item.
  • [#15771] Fixed issue with user able to select item to pack on SOP multiple times.

Software dependancies: Sicon Barcoding and Warehousing 250.0.3

Date applied: October 10, 2025

250.0.3

Issues Resolved New Features Dev Notes
New Features
  • [#16153] Added ability to add found items on a Sage stocktake.
  • [#11510] Import Stock Item Barcodes now allows import if multiple barcodes for unspecified suppliers, by including ‘*’ in the ‘stock item supplier’ column/field.
  • [#16328] [#16328]: Made sure that the picking allocations on works orders handle traceable items when selecting traceables at allocation. If a batch is split across bins, then the ‘smart’ bin is shown to pick from.
  • [#16245] Despatch sales orders now allows user to maintain box/package dimensions after adding packages, not only at the point of despatch.
  • [#16246] Added maintainable package types with default dimensions. When configured these can be selected on the device instead of simply adding generic ‘boxes’.
  • [#16278] Added new feature to allow user to select a stock item to despatch. This will option the sales order to allow the user to despatch the sales order.
  • [#16245] Add package dimensions to the Package Enquiry information grid/list.
Issues Resolved
  • [#13244] Fix Despatch Stock Transfer ‘Packing’ list showing duplicate item/quantity entries if multiple different batches/serials have been picked into the same box/package.
  • [#15728] Fix Add Stock (Backflush) not writing the finished goods batch/serial number to label/reporting database table SiconWABTraceLabel.
  • [#15859] Fix Despatch Sales Orders ‘Object set to an instance of an object …’ error when despatching a free-text line.
  • [#15874] When having the setting to restrict multiple users from accessing the same sales order turned on, there are occasions when multiple users can still access the same order. For example, if two or more users select the same sales order at the same time. We have now added an extra check when picking or packing a sales order item to see if another user is picking the order.
  • [#16072] Fixed issue where if a traceable item was picked by scanning a barcode with an incorrect use by date in it, then the use by date was cleared against the traceable item in Sage.
  • [#15748] Fix SOP Despatch showing kit component item description despite stock item not being configured as ‘Use item description on orders and invoices’.
  • [#16096] Fix Wave Pick get wave info ‘Object reference not set …’ error if no orders found.
  • [#16097] Fix Works Orders Book incorrectly calculating finished goods item AmountOfTotalCost, which results in an additional/incorrect nominal variance posting if the item is later un-booked.
  • [#15688] Fix Despatch Sales Orders with build kit ‘Issuing lines failed. Process was cancelled’ (or ‘Object of type …’) error if a serial controlled kit component with a quantity greater than 1 is despatched.
  • [#15712] Fix for preventing traceables items showing on the despatch tab of the sales order duplicate times incorrectly when cache picking is on.
  • [#16194] Added check to prevent over picking. There were occasions where the user somehow managed to pick a sales order line multiple times. It will now display a message saying the line is already picked, and to please refresh the items to pick list.
  • [#15915] Fix sales return Confirm Goods Received defaulting list/grid items to pick/pack bins despite these being hidden in the drop-down due to configuration setting.
  • [#16006] Fix Maintain Locations screen speed issue if sorting by zone with large data.
  • [#16404] Fix Put Away ‘Socket closed’ error when adding a large number of pallets/packages using auto-numbering.
  • [#16781] Fix ‘Unable to cast object of type ‘Sage.Common.Controls.Panel’ …’ when the Stock Item Details screen is opened and running Sage 200 2025 R1.
Dev Notes
  • [#15784] Updated .Net Framework to 4.7.2

Software dependancies: App. 250.92.4.0

Date applied: October 10, 2025

250.92.3.0

Issues Resolved
Issues Resolved
  • [#16096] Fix Wave Pick add/remove tote ‘Object reference not set …’ error.

Date applied: August 15, 2025

250.92.2.0

Issues Resolved New Features Dev Notes
New Features
  • [#9708] Added function to print labels when receiving a sales order return + minor change to error message + move ‘Receive Sales Order Returns’ menu option closer to ‘Despatch Sales Orders’.
  • [#13244] Despatch Stock Transfers now allows packing into multiple packages by selecting the pack quantity for each package.
  • [#15245] Fix Wave Pick not saving boxes created using the ‘enter number of boxes’ page if despatch note printing fails.
Issues Resolved
  • [#15211] Fixed issue with free text lines sometimes not appearing on the sales order despatch screen after a free text line has been picked.
  • [#15369] Fix Despatch Sales Orders pick calculating batch/serial item use by date if configured with a default shelf life.
  • [#15665] Corrected display issue on list view on wave SOP pick when not grouping lines to pick. Was displaying a message ‘Sicon.WM.Models.Stock.PickListItem’.
  • [#15605] Prevented double picking a sales order line. There was a number of reasons: The call to refresh the list was done more than once after a Pack and if the user moved tabs. This allowed the user to select an item in the To Pick list before the list was refreshed (between refreshes). So we took out the refresh between tabs. This improves user experience as well. Also added code to prevent user selecting an item in the To Pick list while it was loading. Also made sure that the list would reset with the new list syncronously and not then update later after the user had selected an item. Also noticed that the item requested on the Pack item was not updating correctly after a pick.
  • [#15676] Fix Despatch Sales Orders not automatically incrementing pick quantity when a stock item barcode is scanned.
  • [#15510] Fix ‘Automatically complete pick when scanning the last item …’ not working on Wave Pack when only a single item is required.
  • [#15301] Moved the pop-up (‘snackbar’) that appears after a success to the top of the page. This allows the user to select the action button more quickly.
  • [#15301] Fixed layout of info banner at the top of the page as it was too small on some devices.
  • [#15314] Added new device specific NFC Setup setting ‘Disable foreground dispatch’ which can be set to fix app. closing (returning to login screen) on specific devices when the power button is pressed to pause/move the app. in the background.
  • [#15473] Fix main menu displaying blank items.
  • [#15208] Fix application crash if an unexpected error occurs during message services.
  • Suppress ‘NFC tag contains no data’ error when saving to a new tag on the NFC Setup screen and improve success/error reporting
Dev Notes
  • [#15208] Add package/sales orders link IDs to model. | No functional changes.
  • Added sqlite version number to login page.

Date applied: August 6, 2025

250.0.2

Issues Resolved New Features Dev Notes
New Features
  • [#9708] Added function to print labels when receiving a sales order return. | Fix ‘or’, change .label file names, etc.
  • [#15208] Added the ability to delete totes linked to a sales order in Wave Pick.
  • [#6166] Added the ability to use smart picking with works orders, once smart picking is enabled this will be active for works orders. We have also added a setting to ignore smart picking for works orders.
  • [#13244] Despatch Stock Transfers now allows packing into multiple packages by selecting the pack quantity for each package.
Issues Resolved
  • [#15484] Fix Despatch Stock Transfer with Smart Picking & ‘Assign stock from bin with full allocated stock quantity available’ including any previously picked quantity in quantity to pick from the Smart Picking assigned bin.
  • [#15859] Fix ‘Object set to an instance of an object …’ error when despatching a free-text line.
  • Fix ‘Allocate / Issue to Work Order’ menu item despite user not having permission to access Works Orders.
Dev Notes
  • [#15689] Add Despatch Sales Orders ‘retry’ logic when failed to set quantity to despatch.

Date applied: August 6, 2025

250.92.1.2

Issues Resolved
Issues Resolved
  • [#15537] Fix Despatch Sales Orders app. crash when taking multiple photo from the ‘Pick’ tab.

Date applied: July 18, 2025

250.92.1.1

Issues Resolved
Issues Resolved
  • [#15676] Fix Despatch Sales Orders not automatically incrementing pick quantity when a stock item barcode is scanned.

Date applied: July 11, 2025

250.92.1.0

New Features Dev Notes
New Features
  • [#14695] Add ‘Proof of Delivery’ menu item and functionality, enabled in user permissions when Sicon Documents is installed. This new menu item allows the user to take a photograph, for proof of delivery purposes, which is stored in the Sicon Documents module against the selected despatch.
  • [#14906] Apply new Sales Orders configuration setting ‘Set pick quantity to current free/allocated total if batch is scanned’ when enabled.
Dev Notes
  • [#13210] Made sure that the Sicon.WM.Models.dll is built for .net framework 452 so that it can be used server side.

Software dependancies: Sicon Barcoding and Warehousing 250.0.1

Date applied: June 11, 2025

250.0.1

Issues Resolved New Features Dev Notes
New Features
  • [#14695] Add new ‘Despatch Proof Of Delivery’ user permission to Settings, requires new ‘Despatch Proof Of Delivery’ DMS document type.
  • [#14906] Add new Sales Orders configuration setting ‘Set pick quantity to current free/allocated total if batch is scanned’
Issues Resolved
  • [#15107] Fix Despatch Sales Orders add item setting line to customer tax rate, despite stock item set to ‘zero rated’.
  • [#15107] Fix Despatch Sales Orders ‘Manual values have been entered for price and discount …’ error if adding a quantity for an existing item.
Dev Notes
  • [#14730] Despatch Sales Orders with build kit writes additional debug/error details to log if Sicon.Sage200.Kitting.Objects.Coordinators.BuildKit throws an exception.
  • [#14911] Added debug logging when connecting to Sage session.
  • [#11630] Add extra logging to ConfirmDespatchOfSOPLines + Avoid record locks/deadlocks when reading stock item catch weight flags.
  • [#14921]: Made sure that windsor framework works when despatching from barcoding handheld.
  • Delete sales order linked local photo files after being filed/indexed into Sicon Documents.

Software dependancies: Sicon Documents 250.0.1

Date applied: June 11, 2025